 |
|
| |
|
Telephone: +91- 79- 2584 0777 / 999 |
|
|
|
|
|
|
|
|
|
|
>> ACCURA MINI PRESS
ACCURA MINI SINGLE ROTARY TABLET PRESS
8 STN. D - TOOLING, 10 STN. D-TOOLING, 10 STN. B-TOOLING & 12 STN. BB-TOOLING
ALSO, SPECIAL TURRET FOR R & D, HAVING ALL TOOLINGS
| Machine
Type |
ACRA-MINI-10
B
|
ACRA-MINI-8
D
|
ACRA-MINI-10
D |
Number of
Stations
|
10 |
8 |
10 |
Type of Tooling
|
B |
D |
D |
Output -
Tablets/Hr.
|
6,000 TO 18,000
|
4,800 TO 14,000
|
6,000 TO 18,000 |
Turet RPM
(Min. / Max)
|
10 - 30.
|
10 - 30.
|
10 - 30. |
Max. Operating
Pressure
|
6 Tons.
|
6 Tons.
|
6 Tons. |
Max. Tablet
Dia.
|
16 mm
|
22 mm
|
22 mm |
Maximum Depth
of fill
|
17.5 mm
|
20.5 mm
|
20.5 mm |
| Upper Punch
Penetration |
2 to 6 mm
|
2 to 6 mm
|
2 to 6 mm |
Dia. of Die
mm
|
30.1 mm
|
38.1 mm
|
38.1 mm |
Length of
Die mm
|
22.22 mm
|
23.71 mm
|
23.71 mm |
Dia of Punch
mm
|
18.99 mm
|
25.349 mm
|
25.349 mm |
| Length of Punch
mm |
133.65 mm |
133.6 mm |
133.6 mm |
Power
|
2.0 HP X 1440 RPM X 415 V. X 50 Hz |
Overall H
X W X D (cm)
|
48
x 67 x 105 H |
Net Weight
(Approx)
|
350 kgs |
|
Note : Specification and features of the machineries are subject to change without any prior notice
SALIENT FEARTURES :
This rotary press is built as per the GMP directives with total robust construction. At the same time, the necessary care has been taken to have trouble free operation, easy to clean and very low noise level. This state-of-the-art equipment can also be used for small batch productions, thanks to its "D" & "B" tooling specification, like 6 Ton Pressure, maximum tablet diameter 22 mm etc. Which can be utilized for achieving the better output in its range.
- Square GMP Table Top Model
- Centre drive fitted with Gear box
- Paint free tablet manufacturing zone
- Turret of Special Grade S.G. Iron casting
|
STANDARD FEATURES
- Upper Punch penetreation.
- Electronic digital Tablet cum RPM Counter
- Inter lock Switches to all Guards
- A.C. Variable Drive
- Pre- Compression facitility
- Lower Guard of polished Stainless Steel
- Upper Guards of Acrylic Material
- Stainless Steel Turrel Guards
- Anti Vibating mount
- Imported needle roller bearing provided at the bottom of turret
- Reverse direction motion protection is provided to avoid accident
- Grease Nipples are provided for effective lubrication, where required
|
 The machine is available with force feeding attachment (Optionally)
The machine is available with poly carbonate upper guards (Optionally)
The machine is available with PLC control (Optionally)
|
|
|
|
|
| |
| |
|
|
|
|
| |
|
