| |
|
|
| |
| |
| |
 |
|
| |
| Out put * |
50 kgs To 200 kgs/ Hour. |
| Rotor Assembly Dia |
250 (Approx) |
| Rotor Speed |
750/1500/2300/3000 R.P.M. |
| Beaters |
12 knife & impact edges & 2 Scrapper Blades |
| Screen Dimensions |
INNER DIAMETER – 260 mm HT- 135mm |
| Motor |
3.0 HP, 1440 RPM, 440 V 50Hz, 3 Phase |
| Starter |
"DOL" with reversible switch |
| Material Charging Height |
1445 mm (Approx) |
| Overall Dimensions (mm) |
870 x 965 x 1630 mm (H) |
| Net Weight |
275 KGS (Approx) |
| Gross Weight |
425 KGS (Approx) |
| Case Dimensions (mm) |
1200 mm X 1250 mm X 1860 mm (ht) |
|
| |
|
|
|
- cGMP point of view machine is provided with SS cladding on base, pillar, machine chamber, SS cover on motor. No exposed painted surface on top of the machine.
- Beaters and shaft are of stainless steel 304 quality and beaters are further hardened and hard chrome plated. Beaters are fitted on a shaft.
- Direction of beaters can be changed by reversible switch.
- Beaters assembly is swing type, dynamically balanced which reduces vibration and noise level and increases bearing life.
- 12 nos. Beaters are of knife and impact edges & 2 nos. beaters are of scrapper blades types.
- All contact parts are of SS 304 quality and can be easily & quickly dismantled and cleaned.
- Cylindrical screen for higher output.
- Flameproof electrical components can be provided at extra cost.
|
|
|
|
|
|
|
| |
| |
|
